Requirement | Cisco Command |
Set a console password to cisco | Router(config)#line con 0 Router(config-line)#login Router(config-line)#password cisco |
Set a telnet password | Router(config)#line vty 0 4 Router(config-line)#login Router(config-line)#password cisco |
Stop console timing out | Router(config)#line con 0 Router(config-line)#exec-timeout 0 0 |
Set the enable password to cisco | Router(config)#enable password cisco |
Set the enable secret password to peter. This password overrides the enable password and is encrypted within the config file | Router(config)#enable secret peter |
Enable an interface | Router(config-if)#no shutdown |
To disable an interface | Router(config-if)#shutdown |
Set the clock rate for a router with a DCE cable to 64K | Router(config-if)clock rate 64000 |
Set a logical bandwidth assignment of 64K to the serial interface | Router(config-if)bandwidth 64 Note that the zero are not missing |
To add an IP address to a interface | Router(config-if)#ip addr 10.1.1.1 255.255.255.0 |
To enable RIP on all 172.16.x.y interfaces | Router(config)#router rip Router(config-router)#network 172.16.0.0 |
Disable RIP | Router(config)#no router rip |
To enable IRGP with a AS of 200, to all interfaces | Router(config)#router igrp 200 Router(config-router)#network 172.16.0.0 |
Disable IGRP | Router(config)#no router igrp 200 |
Static route the remote network is 172.16.1.0, with a mask of 255.255.255.0, the next hop is 172.16.2.1, at a cost of 5 hops | Router(config)#ip route 172.16.1.0 255.255.255.0 172.16.2.1 5 |
Disable CDP for the whole router | Router(config)#no cdp run |
Enable CDP for he whole router | Router(config)#cdp run |
Disable CDP on an interface | Router(config-if)#no cdp enable |
